Before using the self-propelled flipping machine, the following details should be noted:

1. Before starting up, first raise the temperature for about forty to fifty minutes, and then manually pull the motor V-belt until it is comfortable; Pull continuously in the normal working direction for eight to ten times. Then continue to heat up for about ten minutes, and then turn on the machine, but continue to heat up because normal production requires continuous replenishment of heat; Adjust the temperature according to the different properties of plastics.

2. When feeding, sufficient amount of material should be added, but it should be evenly distributed. The feeding speed and feeding speed of the machine should be coordinated appropriately. Otherwise, it will affect the quality and yield of the particles.

3. When the organic fertilizer granulator is working normally, the machine temperature should be kept stable and not fluctuate rapidly. Near the vent hole, the temperature of the machine head should be maintained at around 200 ℃ (referring to material C and material B).

4. When the machine is shut down, the host should be shut down and the power should be cut off. The head plug (with wrench) needs to be removed. Preheat separately before the next use.